INT 13,9 - Initialize Fixed Disk Table (XT & newer)

	AH = 09
	DL = fixed disk number	(80h=drive 0, 81h=drive 1)


	on return:
	AH = status  (see INT 13,STATUS)
	CF = 0 if successful
	   = 1 if error


	- sets specified fixed disk table to the default values from ROM
	- many good programming references indicate this function is only
	  available on the AT, PS/2 and later systems, but all hard disk
	  systems since the XT have this function available
	- INT 41h vector is pointer to table for drive 0
	- INT 46h vector is pointer to table for drive 1


Table	definitions located by interrupt vectors  41H & 46H

	Offset Size	    Description

	  00   word  maximum number of cylinders
	  02   byte  maximum number of heads
	  03   word  starting reduced write current cylinder
	  05   word  starting write pre-comp cylinder
	  07   byte  maximum ECC data burst length
	  08   byte  control byte:


		│7│6│5│4│3│2│1│0│  Control byte
		 │ │ │ │ │ └─┴─┴──── drive option
		 │ │ └─┴─┴───────── always zero
		 │ └────────────── disable ECC retries
		 └─────────────── disable access retires